The SBTi Corporate Net-Zero Standard V2.0: what's changed and what you now have to do

The Science Based Targets initiative published Version 2.0 of its Corporate Net-Zero Standard in June 2026, and it takes effect from February 2027. It shifts the standard from a commitment framework to an action framework: rolling five-year target cycles, a two-category company classification, mandatory board-approved transition plans, a new three-tier implementation hierarchy, and a carbon responsibility programme that becomes partly mandatory from 2035.

This briefing sets out the principal changes from V1 and the full step-by-step process a company must follow to create, validate, implement and renew a science-based target under V2.0.

At a glance
Feb 2027
Effective date, transition period applies
5-year
Rolling near-term target cycles
2
Company categories, A and B
3-tier
Mandatory implementation hierarchy

What has changed in V2.0

The table below summarises the most significant structural changes from V1 and what each means in practice.

AreaChange in V2.0Practical implication
Company categoriesTwo tiers: Category A, large or higher-income, and Category B, small or lower-incomeDetermines which requirements are mandatory versus recommended; reassessed every five years
Target base yearMust use the most recent year with comprehensive data; updated each cycleNo more defending a decade-old baseline; companies re-baseline every five years
Target structureFive-year rolling near-term cycles; separate scope 1, 2 and 3 targetsMore frequent renewal; scopes cannot be combined into one metric
Transition plansMandatory for all; Category A must publish within 15 months of validationPlans must be board-approved and built into corporate strategy
Implementation hierarchyThree tiers: activity-level, activity pool, sector-level; market instruments only permitted lower downPPAs and certificates cannot substitute for direct action unless structural barriers are evidenced
Scope 3 requirementsCategory A must cover all scope 3 categories at or above 5% of total; EIA identification required for allRequires detailed value-chain mapping including emissions-intensive input commodities
The overarching shift in V2.0 is from set a target to demonstrate continuous action. The five-year cycle, implementation hierarchy and mandatory transition plan combine to create ongoing accountability rather than a one-time commitment.

The step-by-step process

Nine steps take a company from registration through validation, implementation and annual reporting, to the end-of-cycle assessment that sets the next five-year target.

Step 1. Register and determine company category

Register with the SBTi and determine whether you are Category A or Category B. This is assessed at consolidated group level and revisited each cycle.

Any country

Net turnover of EUR 450m or more, or 1,000 or more FTEs

High-income countries

Scope 1 plus 2 emissions of 10,000 tCO2e or more, or two of: balance sheet of EUR 25m or more, turnover of EUR 50m or more, 250 or more FTEs

Category A if you meet at least one of the above. All other companies are Category B.

Step 2. Establish board governance and a transition plan

The board, or equivalent highest governing body, must formally approve and own all SBTi targets before submission; this is a prerequisite, not a post-validation step. In parallel, develop a transition plan covering the validated targets for each scope, the actions to meet them this cycle and indicatively next, the key assumptions and constraints, a commitment to phase out unabated fossil fuels where applicable, and plans to decarbonise emissions-intensive activities in the value chain.

The plan must be board-approved and aligned with corporate strategy. Category A must publish it within 15 months of validation. Review at least every five years.

Step 3. Conduct the target base-year assessment

The base year must be the most recent year with comprehensive data, and it updates each cycle rather than being fixed. Define organisational and operational boundaries at ultimate parent level per the GHG Protocol, unless subsidiaries are fully distinct businesses with separate financial reporting.

Prepare a complete GHG inventory covering all Kyoto Protocol gases. Scope 1 and 2 are required for all companies; scope 3, categories 1 to 14, is mandatory for Category A and strongly recommended for Category B. Use the physical, location-based inventory as the primary basis, account for FLAG emissions, bioenergy and removals, report well-to-wheel and well-to-wake transport emissions, and calculate the share of low-carbon electricity, defined as 0.048 kg CO2 per kWh or below and tightening to 0.024 from 2035.

New requirement: identify and quantify Emissions-Intensive Activities (EIAs), which are significant at 5% or more of scope 3 categories 1 to 14, including cement, steel, aluminium, key chemicals, transport modes, FLAG commodities and sold fossil fuel products.

Category A must obtain independent limited assurance over the GHG inventory, LCE calculations and significant EIA emissions before validation. Category B is encouraged but not required.

Step 4. Set near-term targets

Near-term targets cover a five-year period from the most recent reporting period, with separate targets for scope 1, scope 2 and scope 3. They cannot be combined.

Scope 1, all companies

Cover 100% of scope 1 using an absolute reduction, a sector-specific intensity pathway, or a scheduled asset-transition plan, each reaching residual emissions by 2050.

Scope 2, all companies

Cover 100% of scope 2, either by raising the share of low-carbon electricity on a linear trajectory or by reducing absolute scope 2 emissions to a residual level by 2050.

Scope 3, mandatory for Category A

Covering every scope 3 category at 5% or more of your total, set either an overarching absolute reduction, a supplier or customer alignment target, or category-specific targets across upstream and downstream emissions. Category B is not required to set scope 3 targets unless registering a net-zero commitment.

Step 5. Submit for validation

Submit all targets to an SBTi-recognised validation body, with the supporting methodology, a description of dependencies that could affect implementation, confirmation of board approval and governance disclosures, and an indication of intent on the Scope 2 hourly-matching and Ongoing Emissions Responsibility programmes.

Category A companies must also consent to publication on the SBTi Dashboard within six months of validation.

Step 6. Implement using the three-tier hierarchy

V2.0 introduces a mandatory implementation hierarchy, assessed at end-of-cycle, that companies must prioritise in order.

  1. Level 1Activity-level actions, the primary lever

    Direct reductions in operations and the value chain: efficiency, fuel switching, supplier engagement, behind-the-meter renewables, and lower-carbon inputs.

  2. Level 2Activity-pool actions

    Where emissions come from shared systems such as grids, gas networks and logistics, act within that same system, for example PPAs or LCE certificates matched to the same grid deliverability region.

  3. Level 3Sector-level actions

    Only where structural constraints, technological immaturity, infrastructure gaps or regulatory barriers, not cost, prevent action at levels 1 or 2, and only in the same activity type in a relevant context.

Hourly matching, Category A, new

Companies using more than 10 GWh in any activity pool must calculate and report the share of scope 2 matched on an hourly basis. An optional recognition programme marks:

50%
by 2030
75%
by 2035
90%
from 2035
Market-instrument integrity

Market instruments such as PPAs, commodity certificates and RECs must be activity-matched, system-associated, independently quantified, verifiable, aligned within 12 months, uniquely attributed and free from double-counting. Cost is not a valid reason to bypass levels 1 or 2.

Step 7. Report progress annually

All companies report publicly each year on their scope 1 and 2 emissions, and full scope 3 for Category A: progress against each target, the actions taken at each level of the hierarchy, material barriers and the steps being taken, the status of third-party assurance, and, for Category A, alignment progress for category 11, use of sold products.

Step 8. End-of-cycle assessment and renewal

At the end of the five-year cycle, submit a progress assessment to an SBTi-recognised validation body, independently assured for Category A, covering the GHG inventory for the target year, the change from base year and performance against each target, a full record of actions taken at each tier, and evidence of any structural constraints where levels 1 or 2 were not fully achievable.

Companies that have demonstrably used all available levers, reported transparently on barriers, and met minimum progress criteria, to be defined in the SBTi Assurance Manual, may continue in the framework even if targets were not fully achieved. New targets are then set for the next five-year cycle, with the end of the previous target year becoming the new base year.

Step 9. Ongoing Emissions Responsibility programme

The OER programme runs alongside the targets, as a voluntary route to go beyond minimum obligations through carbon finance and verified mitigation. It has three recognition levels, Engaged, Advanced and Leadership, which scale the share of emissions covered and the carbon-finance commitment. From 2035, Category A companies must support eligible carbon removals rising from at least 1% of ongoing emissions to 100% by their net-zero year.

Working out what V2.0 means for your targets?

KEES is working in line with the V2.0 standard and has produced this briefing for clients. Talk to us about your SBTi pathway.

Sources and further reading

SBTi Corporate Net-Zero Standard Version 2.0, Science Based Targets initiative, June 2026, sciencebasedtargets.org. GHG Protocol Corporate Standard and Land Sector and Removals Standard (LSRS), World Resources Institute and WBCSD.